SYNQ SMP 8.2 PRO PA Mixer 8ch.

Max output level (0.5% thd @ 1kHz):+26dB (MAIN L/R) +20dB (INSERT)

T.H.D: <0.1% @ +14dB 20Hz~20kHz (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM)

Frequency response: 20Hz~20kHz, +1/-2dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM)

Hum and Noise (average Rs=150Ohm):

• 127dB equivalent input noise
• 95dB residual noise (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM)
• 88dB (MIX L/R, AUX SEND, EFX SEND, CTRL ROOM) Master fader at nominal level and all channel volumes at minimum.

Maximum Voltage Gain:

• 66dB MIC IN TO MAIN L/R
• 60dB MIC IN TO AUX
• 66dB MIC IN TO EFX
• 76dB MIC IN TO CONTROL ROOM L/R
• 58.2dB IN TO REC L/R
• 46dB LINE IN TO MAIN L/R
• 46dB LINE IN TO AUX
• 46dB LINE IN TO EFX
• 56dB LINE IN TO CONTROL ROOM L/R
• 36dB STEREO IN TO MAIN L/R
• 6dB AUX RETURN IN TO MAIN L/R
• 16dB TAPE IN TO MAIN L/R

Crosstalk (@ 1kHz):

• 70dB between input channels
• 70dB between input/oputput channels

Gain Control (mono input channel)

• 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB)

Gain Control (combined mono/stereo input channel)

• 40dB Variable (-20dB ~ +20dB)

Input channel Equalization:

• HIGH: 12kHz shelving
• MID: 2.5kHz peaking
• LOW: 80Hz shelving
• *Turnover/roll off frequencies: located 3dB below max. boost/cut

LED Meters: 2x 10 segment LED for MAIN L/R

Internal Digital Effect: 100 selectable presets FOOT Switch control (ON/OFF)

Channel indicators:
Peak: an indicator for each channel turns on when the pré-channel fader signal is 5dB below clipping

Phantom Power (balanced input): +48V DC
Power Supply:  AC 230 V, 50Hz
Power consumption: 25W

Weight: 3,4 kg
Dimensions: 249(W) x 75(H) x 295(D) mm